HammerTime Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=== Mount Synology NAS from the Pi ===
[[procedures:pi|Back to Raspberry Pi index]]\\
\\
Put synology 'diskstation' in /etc/hosts\\
  sudo vi /etc/hosts
    192.168.254.100	diskstation
Create the directory for the mountpoint\\
  sudo mkdir -m777 /mnt/nas
  sudo touch /mnt/nas/This_Mount_Pt_is_NOT_MOUNTED

Then edit the /etc/fstab file (which tells your system where to pick up filesystems)\\
with the following line to the end of your /etc/fstab (substituting your share name):\\
  sudo nano /etc/fstab
    diskstation:/volume1/share /mnt/nas nfs defaults 0 0
Save and exit \\
You can now mount this filesystem, again substituting your share name:\\
  sudo mount /mnt/nas/
This share will automount on boot forever after. If you want to make it manual mount add noauto, after defaults, in the fstab line.\\
\\
If you're wanting to access these shares from a process starting at boot, please note that the shares won't be available until the network is available.\\ \\
[[procedures:pi|Back to Raspberry Pi index]]\\

HammerTime Wiki

User Tools

Site Tools

Page Tools